Air conditioning compressor manufacturers tell you what are the inspection methods for compressors not working

　　In real life, if the compressor does not work normally when you turn on the work button, you must check the actual situation of the compressor. Then the air-conditioning compressor manufacturer has more research on the product and equipment in this respect. Why is this kind of equipment not working?

　　Reason 1: Insufficient refrigerant

　　Air-conditioning compressor manufacturers have a better understanding of the entire product and equipment. Generally speaking, the product may have insufficient refrigerant when it is working. When the refrigerant is insufficient, it may cause the air-conditioning clutch to frequently open and close, and even cause the entire The compressor does not work. In this case, the switch must be checked. If so much pull-in may be caused by refrigerant leakage.

　　Reason 2: Control circuit failure

　　A series of problems have occurred at the end of the air conditioner clutch. In this case, you can continue to check in some different directions. Check the current circuit of the air conditioner clutch relay to see if these circuits are open.

　　Reason 3: Relay failure

　　If the relay of the air conditioner clutch is faulty, there may be some non-working situations. Check the port of the device to see if there is a 12V voltage on the device. After turning on the air conditioner, the resistance should preferably be below 10 ohms across the No. 30 or No. 80 terminal, and the entire clutch should also be engaged.

　　Air-conditioning compressor manufacturers check the product equipment, why not work? The reason is as above.