Air conditioning compressor manufacturers: what are the points to note when replacing the compressor

　　Air-conditioning compressor manufacturers will have many operating steps when actually replacing the equipment. In fact, each operating step has its own points of attention. If you can master these points, it will bring a better experience.

　　Point 1: Put refrigerant

　　Air-conditioning compressor manufacturers will find that if they want to replace the compressor, they must pay attention to the existing operation and environment. It is necessary to ensure that the operating environment is fully ventilated to avoid suffocation of related personnel. The speed of discharging the refrigerant cannot be extremely fast to prevent all personnel from being frostbited by the refrigerant. Once the compressor is inspected well, the lack of refrigerating oil may affect the normal use of the entire product and equipment. Pay attention to the color of the spray. If the sprayed color is white, the cleanliness inside the system may be relatively high, and the compressor may not be damaged in any way.

　　Point 2: No-load operation

　　Before removing the old compressor, make sure that all the nozzles of the suction and exhaust pipes are in an open state, and the operation time cannot exceed 5 seconds. It is necessary to judge whether the compressor is blocked enough, or See if they are exhausted. To test the exhaust port.

　　How do air-conditioning compressor manufacturers replace the entire equipment when it is actually operating? The above two methods are more important.