Why was the air-conditioning compressor burnt

　　Air-conditioning compressor equipment may be burnt during use, and once this happens, if it is found in a timely manner, other faults can be eliminated in a short time, but if it is found not in time, it may cause the entire air-conditioning not functioning normally. Air-conditioning compressor manufacturers have many reasons for analysis in this regard.

　　First, the cleaning effort is not enough

　　There is a lot of moisture in the air-conditioning compressor, and this moisture may cause the insulation of the entire air-conditioning compressor to be not particularly good. Moisture or cold and refrigerating oil will continue to circulate in the relevant system. In this way, the state of high temperature or low temperature will more or less change, and more acidic substances may be produced in it, which will destroy the original Motor insulation layer. After a long period of time, the motor may burn out during the operation of the entire equipment.

　　Second, the compressor lacks oil or lubrication

　　Air-conditioning compressor manufacturers basically have refrigerated oil, which mainly depends on the lubrication and sealing of the entire equipment. If the system is short of oil or deteriorates, it may cause the compressor to wear. Slowly, the load of the motor will increase, and the shaft may burst.

　　Why is the air-conditioning compressor burned? Air-conditioning compressor manufacturers believe that the above two reasons are more important.